Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
Easy Splitting of Conveyor Belts

The Ply 130™ is used to separate between the plies of a conveyor belt. This cutting action is often required in preparation before splicing a belt with a splice press. A great advantage of this ply separator is that it can split as deep as 5" (130 mm) in one action. This is especially helpful when splitting very thin belts or belts where the material is difficult to cut, like with thin polyurethane belts. There are 2 models - one for workbench use (PLY 130 WB)more
Unit of Measure

Specifications

Type

 Floor Stand Model

Item Code

 08052

NEMA Plug

 L15-30

Voltage

 230V/3Ph

Frequency

 60 Hz

Splitting Depth

 1.5 to 5.1 in40 to 130 mm

Belt Thickness Above Cut

 0.02 to 0.3 in0.5 to 8 mm

Belt Thickness Below Cut

 0.02 to 0.2 in0.5 to 5 mm

Maximum Belt Thickness

 4 in10 mm

Minimum Tool Dimensions

 22 x 17 x17 in550 x 420 x 420 mm

Maximum Tool Dimensions

 43 x 23 x 19 in1100 x 580 x 470 mm

Tool Weight

 97 to 143 lbs55 to 65 kg