Unit of Measure
Technical Data
|
Product Designation
|
Product Construction/Design
|
Product Characteristics
|
Additional Technical Information
|
Notes
Technical Data
Thickness |
N/A 1.4 mm0.06 in |
Mass of Belt (Belt Weight) |
N/A 1.4 kg/m²0.29 lbs/ft² |
Min. Pulley Diameter with Counter Flection |
N/A 15 mm0.6 in |
Tensile Force for 8% Elongation (k8% Static) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181) |
N/A 0.9 N/mm5 lbs/in |
Tensile Force for 8% Elongation after Relaxation (k8 % relaxed) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181) |
N/A 0.6 N/mm3 lbs/in |
Min. Continuous Operating Temperature Admissible |
N/A -30 ºC-22 ºF |
Max. Continuous Operating Temperature Admissible |
N/A 60 ºC140 ºF |
Coefficient of Friction of Driving Pulley of Steel |
N/A 0.7 |
Seamless Manufacturing Width |
N/A 1200 mm47 in |
Product Designation
Product Group |
N/A Hamid Machine Tapes |
Main Industry Segments |
N/A Paper converting Paper printing and finishing Postal/mail sorting |
Belt Applications |
N/A Machine tape |
Special Features |
N/A Abrasion resistant on both sides Constant and gentle positive grip Dimensionally stable Elastic |
Mode of Use/Conveyance |
N/A Declined Horizontal Inclined Twists with short center distance Vertical |
Product Construction/Design
Conveying Side (Material) |
N/A Acrylonitrile-Butadiene-Rubber (NBR) |
Conveying Side (Surface) |
N/A Rough structure |
Conveying Side (Property) |
N/A Adhesive |
Conveying Side (Color) |
N/A Green |
Traction Layer (Material) |
N/A Hamid |
Number of Fabrics |
N/A 0 |
Running Side/Pulley Side (Material) |
N/A Acrylonitrile-Butadiene-Rubber (NBR) |
Running Side/Pulley Side (Surface) |
N/A Rough Structure |
Running Side/Pulley Side Property |
N/A Adhesive |
Running Side/Pulley Side (Color) |
N/A Black |
Product Characteristics
Slider Bed Suitable |
N/A No |
Carrying Rollers Suitable |
N/A No |
Troughed Installation Suitable |
N/A No |
Antistatically Equipped |
N/A Yes |
Additional Technical Information
Chemical Resistance Class |
N/A 2 (These indications are not guarantees of properties) |
Installation and Handling Instructions |
N/A Elastic belt: Initial elongation depends on belt load and application.; initial elongation between 3 to 8% is recommended. |
Limitations |
N/A Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user's analysis in the respective environment. |
